Last modified: Monday, March 16, 2020, 3:59 PM
Skip (new HTML block)
Skip Featured Courses
Featured Courses
Loading...
XTi, DSi and Cdi
USB Communications
A demonstration of installing the USB VID drivers for USB enabled, Crown amplifiers in Audio Architect.
CDi DriveCore
DSP Configuration
The DSP features available to Crown CDi Series amplifiers.
CDi DriveCore Amplifiers
Getting to Know
The Crown CDi DriveCore Series and it's feature set optimized for selective installed audio market segments.
DriveCore Install Series
Aux Port's Sleep & Amp Status
The Sleep and Amp Status features of the AUX Port of a DCi amplifier and shows how to configure these features.
DriveCore Install Series
Storing Speaker Tunings
How to save, load, and distribute amplifier Speaker Tunings.
DriveCore Install Series
Storing Presets
How to save, load, and distribute amplifier Presets.
DriveCore Install Series
Storing Device Files
How to save, load, and distribute amplifier Device Files.
DriveCore Install Series
Using Contrio Wall Controllers
How to configure the BSS Contrio Wall Controllers to work with a Crown DCi Network Amplifier.
DriveCore Install Series
How to Update Firmware
How to update firmware in a DCi Network Amplifier.
DriveCore Install Series
Factory Reset
How to perform a Factory Reset on a DCi Network amplifier.
DriveCore Install Series
Setting Amp Channels to Auto Standby
How to configure independent amp channels to enter a low-power Auto Standby state based on user-adjustable settings.
DriveCore Install Series
Routing Audio onto the BLU Link Bus
How to route audio from the analog inputs of a DCi Network amplifier onto the BLU Link BUS for distribution to other devices in the BLU link ring.
DriveCore Install Series
Configuring Continuous Load Monitoring
How to configure a DCi Network amplifier to monitor and report errors in output load impedance.
DriveCore Install Series
Monitoring & Reporting Input AC Line Errors
How to monitor and report errors based on the Input AC Line powering a DCi Network amplifier.
DriveCore Install Series
Configuring BLU Link for 48/96kHz
How to switch between 48kHz (default) and 96kHz sampling rate for BLU link audio.
DriveCore Install Series
BSS Audio BLU8v2 VCA Control
How to use BSS Audio BLU8v2 for VCA control of a Crown DriveCore Install Network amplifier.
DCi Amplifiers
Getting to Know
An overview of the DCi Amplifier family and the benefits and features of the series.
I-Tech HD Amplifers
Getting to Know
An overview of the LevelMAX protection suite within the I-Tech HD amplifier.
HiQnet Band Manager
Getting Started
A quick overview of the launching and population of HiQnet Band Manager software with XTi amplifiers.
HiQnet Band Manager
Identifying Amplifiers
The process of identifying XTi amplifiers in HiQnet Band Manager. This allows one to match the virtual amplifiers in the software with the hardware...
HiQnet Band Manager
Loading Device Files
How to load a JBL or other device file into an XTi amplifier using HiQnet Band Manager Software.
HiQnet Band Manager
Mastering EQ Control
How to make changes to multiple XTi amplifiers using the HiQnet Band Manager software.
HiQnet Band Manager
Adjusting A Single Amplifier
The basic process of adjusting just one XTi amplifier in the Band Manager software.
XLS Amplifiers
Factory Reset
A walk through of a factory reset on an XLS Amplifier which fixes the no audio on the output issue that has been reported to our service centers.
Audio Architect
Audio Architect vs Other Software
The differences between Audio Architect, London Architect, and System Architect.
crown
Audio Architect
Choosing the Right Networked Audio
Where to properly specify CobraNet, BLU link, AVB, and Dante solutions.
crown
Audio Architect
Associate Amplifiers Mode
How to use the Associate Amplifiers workflow.
crown
Audio Architect
Configure Monitoring Part 1
How to use the Configure Monitoring workflow, part 1.
crown
Audio Architect
Configure Monitoring Part 2
How to use the Configure Monitoring workflow, part 2.
crown
Audio Architect
Define Venue
How to use the Define Venue workflow.
crown
Getting to Know
Audio Architect
An introductory look at the Audio Architect software solution for configuring and monitoring several Harman components.
crown
Audio Architect
Route Audio Mode
How to use the Route Audio workflow.
crown
Audio Architect
Match Devices Mode
How to match physical devices discovered on the network with virtual devices in your Audio Architect venue.
crown
Audio Architect
NetSetter
How to use NetSetter to discover and configure network information for your HiQnet devices.
crown
Audio Architect
Network Settings & Connectivity
How to configure Audio Architect to work on your network.
crown
Audio Architect
Networking Basics Part 1
The OSI network model and its relation to Harman technologies
crown
Audio Architect
Networking Basics Part 2
Networking considerations before going online with Audio Architect.
crown
Audio Architect
Run Venue Mode
What is available for control and monitoring after synchronizing the venue.
crown
Audio Architect
Synchronize Venue Mode
How to load, send, and receive device configurations.
crown
Audio Architect
File Menu
Features available under Audio Architect's File Menu.
crown
Audio Architect
Protection from Data Loss
How to protect yourself against data loss.
crown
Audio Architect
Window Management & Navigation
How to optimize Audio Architect for an efficient user experience and workflow.
crown
Audio Architect
Signal Naming
How to make the most of signal name follow-through in Soundweb London processors.
crown
Audio Architect
Troubleshooting Audio
How to effectively use several types of meters and mute indicators in Soundweb London processors.
crown
Audio Architect
Virtual Wiring
Virtual wiring techniques for Soundweb London processors.
crown
DriveCore Install Amplifiers
Analog Input Routing
How to route analog audio with a DriveCore Install Network amplifier.
crown
DriveCore Install Amplifiers
Analog vs Network Comparison
The differences between the DriveCore Install models.
crown
DriveCore Install Amplifiers
BLU Link Input Routing
How to route BLU link digital audio with a DriveCore Install Network amplifier.
crown
DriveCore Install Amplifiers
How to Select High Z (70v/100v)
How to configure a DriveCore Install Network amplifier for high impedance speaker loads (70V/100V).
crown
DriveCore Install Amplifiers
Input Y & Bridge Mode Settings
How to configure a DriveCore Install Network amplifier for Input Y and Bridge modes.
crown
DriveCore Install Amplifiers
Priority Input Routing
How to configure a DriveCore Install Network amplifier for redundant input sources.
crown
DriveCore Install Amplifiers
Signal Generator
How to use the built-in signal and noise generator in a Crown DCi-N amplifier.
crown
Audio Design Essentials
Amplifiers as Part of a System
Explaining the amplifiers place within the sound system. It also covers the technology of various types of Pro Series Crown amplifiers like CDI, DCiN...
crown jbl
Audio Design Essentials
Getting to Know Amplifiers
The various Crown and JBL commercial series amplifiers and how they fit into various applications. We also discuss features and specifications of...
jbl crown
DriveCore Install Amplifiers
DSP
The DSP features inside a DriveCore Install Network amplifier.
crown