Last modified: Monday, March 16, 2020, 4:16 PM
Skip (new HTML block)
Loading...
676 Tube Mic Preamp
Configuring
The suggested method for setting up gain structure on a dbx 676 Tube Microphone Preamp Channel Strip.
AFS2
Advanced Feedback Suppression Processor
The set up of the new dbx AFS2 Advanced Feedback Suppression Processor with a basic P.A. system.
VENU360
Configuring
The process for creating a custom speaker and amplifier tuning setup for the dbx DriveRack VENU360.
VENU360
Firmware Update
The process of updating the firmware for the dbx DriveRack VENU360 Complete Loudspeaker Management System.
PA2
Configuring
How to manually optimize your gain structure using a custom setup.
PA2
Manually Optimizing Gain Structures
How to optimize the gain structure of your system if your amplifier, or amplifiers are not listed in the DriveRack PA2's setup wizard.
PA2 Control Application
Introduction & Main Features of the PA2 Control App
This video will introduce you to the many features that make up the dbx DriveRack PA2 Control Application. We will review the DriveRack PA2's Wizard...
PA2
Wireless Networking
How to connect the dbx DriveRack PA2 to a wireless network. We'll show you how to physically connect your device, as well as verify that you're...
PA2
Wizard Setup
The process for running the dbx DriveRack PA2 Wizards. The DriveRack PA2's Wizards walk you through the configuration process with simple,...
PA2
Firmware Update
The process of updating the firmware for your dbx DriveRack PA2.
goRack (discontinued)
Technical Overview
The features, quick setup with a PA System and routing options available from the dbx goRack Performance Processor. Follow along to learn about the...
Getting to Know
goRack (discontinued)
The dbx goRack’s inputs and outputs, interface, key features setups and routing options, as well as audio demonstrations to hear the goRack in...
Getting to Know
ZonePRO Series
The feature set available to each model in the ZonePRO series.
ZonePRO Series
Connecting to ZonePRO Designer Software
The process for connecting a dbx ZonePRO™ hardware device with ZonePRO Designer Software.
ZonePRO Series
Using the Configuration Wizard
The process for setting up a dbx Zotero processor using the configuration wizard in our ZonePRO Designer Software.
ZonePRO Series
Basic Programming Part 1
The configuration wizard in ZonePRO Designer to configure a ZonePRO 640 for a retail application.
ZonePRO Series
Basic Programming Part 2
The configuration wizard to configure a ZC-1 and ZC-3 for volume and source selection, and completes the basic system design for a retail...
ZonePRO Series
Basic Programming Part 3
The creation of scenes, and provides an overview of the input processing and output router.
ZonePRO Series
Basic Programming Part 4
Copying and pasting DSP objects, and provides an overview of the output processing.
ZonePRO Series
Page Steering with ZC3 & ZC7
How to set up page steering in Zone Pro Designer using ZC-3 and ZC-7 controllers.
Audio Design Essentials
Getting to Know Signal Processors
Walk thru the various features of the different models of BSS Audio London series processors as well as the dbx ZonePRO processors.
dbx