Course name

Course category

Basic Programming Part 2 | ZonePRO Series

The configuration wizard to configure a ZC-1 and ZC-3 for volume and source selection, and completes the basic system design for a retail application.

Basic Programming Part 3 | ZonePRO Series

The creation of scenes, and provides an overview of the input processing and output router.

Basic Programming Part 4 | ZonePRO Series

Copying and pasting DSP objects, and provides an overview of the output processing.

Configuring | 676 Tube Mic Preamp

The suggested method for setting up gain structure on a dbx 676 Tube Microphone Preamp Channel Strip.

Configuring | PA2

How to manually optimize your gain structure using a custom setup.

Connecting to ZonePRO Designer Software | ZonePRO Series

The process for connecting a dbx ZonePRO™ hardware device with ZonePRO Designer Software.

Firmware Update | VENU360

The process of updating the firmware for the dbx DriveRack VENU360 Complete Loudspeaker Management System.

Page Steering with ZC3 & ZC7 | ZonePRO Series

How to set up page steering in Zone Pro Designer using ZC-3 and ZC-7 controllers.

Using the Configuration Wizard | ZonePRO Series

The process for setting up a dbx Zotero processor using the configuration wizard in our ZonePRO Designer Software.

Wireless Networking | PA2

How to connect the dbx DriveRack PA2 to a wireless network. We'll show you how to physically connect your device, as well as verify that you're receiving an IP address from your wireless router.

Wizard Setup | PA2

The process for running the dbx DriveRack PA2 Wizards. The DriveRack PA2's Wizards walk you through the configuration process with simple, step-by-step instructions.

Getting to Know | ZonePRO Series

The feature set available to each model in the ZonePRO series.

Advanced Feedback Suppression Processor | AFS2

The set up of the new dbx AFS2 Advanced Feedback Suppression Processor with a basic P.A. system.

Basic Programming Part 1 | ZonePRO Series

The configuration wizard in ZonePRO Designer to configure a ZonePRO 640 for a retail application.

Configuring | VENU360

The process for creating a custom speaker and amplifier tuning setup for the dbx DriveRack VENU360.

Firmware Update | PA2

The process of updating the firmware for your dbx DriveRack PA2.

Introduction & Main Features of the PA2 Control App

This video will introduce you to the many features that make up the dbx DriveRack PA2 Control Application. We will review the DriveRack PA2's Wizard Setup functions and show you how easy it is to edit the PA2's Graphic EQ, AutoEQ, AFS (Advanced ...

Manually Optimizing Gain Structures | PA2

How to optimize the gain structure of your system if your amplifier, or amplifiers are not listed in the DriveRack PA2's setup wizard.

Technical Overview | goRack (discontinued)

The features, quick setup with a PA System and routing options available from the dbx goRack Performance Processor. Follow along to learn about the goRack’s function buttons and controls.

goRack (discontinued)

The dbx goRack’s inputs and outputs, interface, key features setups and routing options, as well as audio demonstrations to hear the goRack in action! Note: It may be difficult to hear the full effect of the goRack's Sub Synth feature depending on...