• Part 22: Parametric EQ

      4.25 minutes

      In this tutorial, we will be discussing paramtetric EQ which is included for each source, as well as each zone individually. We will talk a little bit about how it can be used and why the inputs & outputs have their own EQ.

      Watch video

      Part 23: Automatic Gain Control

      4.0 minutes

      In this tutorial, we will talk about automatic gain control: what it is, how you can utilize it, and how to configure it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 24: Notch Filter

      1.5 minutes

      In this tutorial, we will talk about the Notch Filter: what it does, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

    • Part 25: Compressor

      4.5 minutes

      In this tutorial, we will talk about compression: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 26: Noise Gate

      2.75 minutes

      In this tutorial, we will talk about the Noise Gate: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 27: De-esser

      2.75 minutes

      In this tutorial, we will talk about the De-esser: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

    • Part 28: Advanced Feedback Suppression

      4.5 minutes

      In this tutorial, we will talk about Advanced Feedback Suppression (AFS): what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 29: Mid Router

      5.0 minutes

      In this tutorial, we will talk about the Mid Router: what it is, how to configure it, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 30: Mid Mixer

      5.5 minutes

      In this tutorial, we will talk about the MId Mixer: what it is, how to configure it, and how to mix the various sources using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

    • Part 31: Auto Warmth

      2.25 minutes

      In this tutorial, we will talk about Auto Warmth: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 32: Band Pass Filter

      1.5 minutes

      In this tutorial, we will talk about the Band Pass Filter: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 33: Limiter

      4.0 minutes

      In this tutorial, we will talk about limiting: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

    • Part 34: Ambient Noise Compensation

      4.25 minutes

      In this tutorial, we will talk about Ambient Noise Compensation: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 35: Delay

      1.25 minutes

      In this tutorial, we will talk about using delay: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video

      Part 36: Output Polarity

      0.5 minutes

      In this tutorial, we will talk about the Output Polarity: what it is, and how to utilize it using the Program Screen within the ZonePRO Designer GUI software.

      Watch video